- At Brown Springs we are able to your reset spring to resist sagging because we reset ‘hot’.
We can reset coil springs & lead springs. - By heating the spring leaves to a certain temperature in the furnace the longevity of the spring is ensured and any corrosive build up can be removed.
- Each leaf is individually “set and fitted” to suit the camber of the leaf above.
- Resetting leaf springs will adjust height and replace tension the spring has lost over time. Should increase strength be required then additional leaves can also be added to springs
- The type of reset can vary depending on load requirements.
- Generally springs are set to slightly above required height to allow for settlement once fitted back into vehicle.
- Leaf springs can only be reset and serviced providing they are not too worn or rusty internally.
- Brown’s Springs specalise in commercial 4wd Coil Springs and leaf suspension.
RESETTING EXISTING SPRINGSpabs2020-07-08T15:15:47+00:00